If you want to make homemade fog juice without glycerin, you can use propylene glycol as an alternative. This is a common ingredient in fog fluid and is often easier to find than glycerin. Here’s how to make a simple, DIY fog juice that works in most fog machines.
Ingredients:
- Distilled Water: It’s important to use distilled water to prevent mineral build-up in the fog machine.
- Propylene Glycol: This is the key ingredient that will create the fog effect. You can find propylene glycol in some health stores, pharmacies, or online.
Fog Juice Recipe:
1. Light Fog (Less Dense)
- 1 part propylene glycol
- 4 parts distilled water
2. Medium Fog (Standard Density)
- 1 part propylene glycol
- 3 parts distilled water
3. Thick Fog (Dense Fog)
- 1 part propylene glycol
- 2 parts distilled water
Instructions:
- Mix the ingredients in a clean container, adjusting the ratio based on how thick you want the fog to be.
- Pour the mixture into your fog machine’s fluid reservoir.
- Run the fog machine as usual, and it should produce a nice, even fog.
Adjusting Fog Density:
- To create lighter, less dense fog, increase the amount of distilled water in the mix.
- For thicker, denser fog, use a higher proportion of propylene glycol.
Tips for Best Results:
- Test small batches first to see how the fog machine handles the mix. Each machine may produce slightly different results based on its design.
- Always use distilled water to avoid clogging the machine with minerals.
- Store leftover fog juice in a sealed container in a cool, dark place to keep it fresh for future use.
Conclusion:
You can easily make homemade fog juice without glycerin by using propylene glycol mixed with distilled water. This mixture will produce a similar fog effect to commercial fog fluids, and it’s customizable depending on how dense or light you want the fog to be.